北京化工大学化工学报

一) 学术期刊论文·张建文，张政，秦霁光，降膜结晶分离技术实验研究，化工冶金，, , (1999)· Zhang Jianwen, Zhang Zheng, Numerical Simulation of Fluid Flow and Heat Transfer in a Spiral Finned Tube, J. of Chinese Chemical Engineering, , , pp. 56-66 (1999) （SCIE/EI）·张建文，张政，螺旋翅片管内流体流动与传热的数值模拟，高校化学工程学报，Vol. 13, : (1999) （EI）· Zhang Zheng, Zhang Jianwen, Numerical Study On Heat And Mass Transfer In Falling Film Crystallization By An Integrated Model, Heat Transfer—Asian Research, , , (1999) （EI）·Zhang Jianwen, Zhang Zheng, Qin Jiguang, Experimental Study On Falling Film Crystallization Process, EC & M, Vol. 11, pp. 54-65 (1999)·张建文，张政，降膜结晶分离技术实验研究，清华大学学报，, , pp. 83-85 (2000)（EI）·张建文，张政，混合二氯苯显微镜热台定向结晶过程实验研究，化工学报，, , pp. 560-564 (2000)· 贺键芸，程源，张建文, 短纤维-弹性体复合材料的注射充模I.数学物理模型的建立, 合成橡胶工业，Vol. 24, , (2001) （EI）· 贺键芸，程源，张建文, 短纤维-弹性体复合材料的注射充模II. 数值模拟和实验研究, 合成橡胶工业, Vol. 24, , (2001)· 张政，张建文，降膜结晶分离过程热、质及动量传递的数值模拟（I）分区域统一模型, 化工学报，, , (2001) （EI）· 张建文，张政，降膜结晶分离过程热、质及动量传递的数值模拟（II）模拟计算，化工学报，Vol. 52, , (2001) （EI）· 张建文，沈志刚，陈建峰，双置换复分解结晶生产硝酸钾新工艺的模拟分析，化工科技，2002，10(2)5-10· 陈建峰，梁继国，张建文，两股无预混流体湍流混合与反应过程的数值模拟，化工学报，2004, 55（2）：207-213· 梁继国，陈建峰，张建文，旋转填充床内微观混合的数值模拟，化工学报，2004，55（6）：882-887 （EI）· 赵瑾，张建文，沈志刚，陈建峰，许明，反应沉淀法制备亚微米粒子的粒度分布模拟与实验验证，化工学报，2004, 55(9): 1499-1504 （EI）· 李淑平，张建文，况春江，高温气体过滤除尘脉冲反吹再生过程的研究进展，过滤与分离，2004，14（1），5-10· 李淑平，张建文，况春江，文氏嘴结构对金属滤管脉冲反吹过程流动特性影响的数值模拟研究，北京化工大学学报(自然科学版)，2004，31（3）：9-14 （CAS）· 许明，张建文，陈建峰，沈志刚，赵瑾，超重力旋转床中气液两相流动与传质过程的数值模拟，北京化工大学学报，2004, 31(5): 30-35· 许明，张建文，陈建峰，赵瑾，沈志刚，超重力旋转床中水脱氧过程的模型化研究，高校化学工程学报，2005, 19(3): 309-314 （EI）· 谢灼利，张建文，魏利军，刘骥，地铁车站站台火灾中人员的安全疏散,中国安全科学学报，2004，14(7):21-25· Jin Zhao, Jianwen Zhang, Ming Xu, Jianfeng Chen, Numerical study on particle size distribution in the process of preparing ultrafine particles by reactive precipitation, Chemical Engineering Journal, 110 (2005) 19–29 （SCI/EI）· Hai-Jian Yang, Guang-Wen Chu, Jian-Wen Zhang, Zhi-Gang Shen, and Jian-Feng Chen, Micromixing Efficiency in a Rotating Packed Bed: Experiments and SimulationInd. Eng. Chem. Res. 2005, 44, 7730-7737 （SCI/EI）· 杨海健，张建文，苗健瑞，初广文，陈建峰，管式填料床反应器内的湍流微观混合研究，高校化学工程学报，2006, 20(3): 390-394二) 国际会议论文· Zhang Z, Zhang JW, Integrated Model of Heat and Mass Transfer in a Falling Film Crystallization Process, Heat Transfer Science and Technology, (1996) （EI）· Zhang Jianwen, Zhang Zheng, Experimental Study on Directional Melt Crystallization of Mixed DCBs under Microscope, Proceedings of International Symposium On Industrial Crystallization, , Tianjin, Sep., 1998· Zhang Jianwen, Zhang Zheng, NUMERICAL SIMULATION OF SWEATING PROCEDURE, Asian Conference on Fluid Dynamics 1999, , Shenzhen, December, 1999· Zhang Jianwen, Zhang Zheng, Numerical modeling of momentum, heat and mass transfer in falling film crystallization process，Spain, Madri, July, 2000· Zhang Jianwen, Zhang Zheng, Numerical Study of Transportation Phenomena In Sweating Procedure, Heat Transfer Science and Technology, , 2000 （ISTP）· Zhang Jianwen, Zhang Zheng, Numerical Modeling of Momentum, Heat And Mass Transfer in Falling Film Crystallization Process, International Conference on Applied Computational Fluid Dynamics, 2000· Zhang Jianwen, Zhang Zheng, A Continuum Model For Simulation Of Momentum, Heat And Mass Transfer In Falling Film Crystallization Process, Advances in Computational Heat Transfer II, 2, , 2001, Palm Cove, Queensland, Australia, 2001· C. Kuang, J. Zhang, F. Wang, J. Chen, Development and Behavior of Metallic Filter Element and Numerical Simulation of Transport Phenomena during Filter Regeneration Process, NETL , Morgantown, West Virginia, September 2002· J. Zhang, F. Jia, . Galea, J. Ewer, A new approach to the simulation of gaseous combustion and its application to two test fire scenarios, INTERFLAM 2004, Edingburge, 2004. (ISTP)·论 著：参编《化学工业区应急响应系统指南》，化学工业出版社，2006年3月，北京。